Siemens SWT 3000 Equipment Manual page 240

PowerSys and Auxiliary Software Tools
5.5 PU4 Firmware Upgrade with Mem Tool
[scstrmem-020413-01.tif, 1, en_US]
Figure 5-41
When starting MemTool for the first time, the Select Target Configuration dialog is displayed. Otherwise, you
can reach this dialog via the menu bar Target > Change.
[sctarget-020413-01.tif, 1, en_US]
Figure 5-42
Select Siemens SWT 3000 - PU4 (v1.1 - serial, 115200 baud) and click OK.
240
MemTool with the PU4 Target
Selecting the Siemens SWT 3000 - PU4 (v0.1 - serial, 115200 baud)
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020