Siemens SWT 3000 Equipment Manual page 234

PowerSys and Auxiliary Software Tools
5.4 MemTool Installation
Select Device > Setup > Mapping in the menu bar and enable the Also Remap Read Accesses and Allow
overwriting of buffered Data check boxes as follows:
[scdesema-260313-01.tif, 1, en_US]
Figure 5-36
Settings for the Driver tab are default and remain unchanged.
234
Device > Setup > Mapping
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020