Siemens SWT 3000 Equipment Manual page 215

With the selection of FW-Release > Export, the following dialog appears:
[scselexp-201113-01.tif, 1, en_US]
Figure 5-16
(1) Selection of the firmware packages
(2) Selection of the file
With the Ok button, the FW export is carried out and the file stored in the subdirectory Firmware.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Selecting a File for the Export from the Firmware
PowerSys and Auxiliary Software Tools
5.2 PowerSys Startup
215