Remote Access Example; Inband Rm-Channel - Siemens SWT 3000 Equipment Manual

[scconnpc-080611-01.tif, 1, en_US]
Figure 6-24
(1) Data source device button
6.3.1.2

Remote Access Example

The following figure shows a TCP/IP connection to the SWT 3000 device in station A and B. If the RM function
is activated, information from the SWT 3000 device in station C can be read via inband RM-Channel.
[dwtcpipc-080611-01.tif, 1, en_US]
Figure 6-25
↔ Protection signal transmission path
SC Service channel
ETH Ethernet interface (TCP/IP)
USB Local interface
SSB Remote monitoring interface
RM

Inband RM-Channel

Inband RM-Channel
6.3.2
If there are no intranet or modems available, you can still monitor or configure remote terminals using the
inband RM-Channel. With the optional service Remote Monitoring (RM), data can be transmitted between the
devices of one or more SWT 3000 routes.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Connecting the Service PC
TCP/IP Connection to the SWT 3000 Devices in the Station A and B and Remote Access to the
Station C via Inband RM-Channel
SNMP and Remote Access
6.3 Remote Access
295