Siemens SWT 3000 Equipment Manual page 266

PowerSys and Auxiliary Software Tools
5.8 MergeTool for IEC 61850
Table 5-8
Parameter
Time zone offset to GMT
Summer time
switchover
Summer time offset
to GMT
Start of summer time
End of summer time
Edit the Services as follows:
Table 5-9
Parameter
SNMP
Module homepage
266
Time Zone and Summer Time Settings of EN100 Settings
Description
The time offset of your time to the Greenwich Mean Time (GMT).
Select the option enabled or disabled summer time switchover if
you do or do not wish to change to daylight saving time.
The time offset of your time to the GMT.
Date for the change to daylight saving time.
Date for the change from daylight saving time.
Service Settings of EN100 Settings
Description
You can use this setting to activate or deactivate the SNMP protocol.
You can use this setting to activate or deactivate the module homepage.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Setting Range or
Selection
From -12 h to +12 h
enabled or disabled
From 0 h to +23 h
Selection
ON or OFF
ON or OFF