Siemens SWT 3000 Equipment Manual page 169

[sc_configuration_output_allocation, 2, --_--]
RM Configuration
RM is directly routed through the T-device, no external cable connections (SSB) are necessary. Settings for RM
master/slave are still valid for T-scheme.
[sc_RM_interface_setting, 1, --_--]
Setting
Interface RM LID-1
Interface RM LID-2
All other RM settings stay the same as with non-T-scheme devices.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Installation and Commissioning
Master / slave for LID-1 interface.
If it is set to slave, the remote end connection shall be
set to master.
Master / slave for LID-2 interface. It has to be set to
differnet as local interface LID-1.
If it is set to master, the remote end connection has
to be set to slave, and the local LID-1 interface set to
slave
3.5 Device Configuration
169