Connection Of An External Swt 3000 To The Powerlink 50/100 - Siemens SWT 3000 Equipment Manual

10.2

Connection of an External SWT 3000 to the PowerLink 50/100

The connection of an external SWT 3000 to the VF- interface of a PowerLink device is carried out via the back-
plane connector of the CLE and the D-Sub sockets (VFx) on the connector panel of the PowerLink. The prin-
ciple is shown in the following figures. In this case, the VFx ports 3 or 4 must be used.
VFx port 3
[dwcovfx3-110711-01.tif, 1, en_US]
Figure 10-6
VFx port 4
[dwcovfx4-110711-01.tif, 1, en_US]
Figure 10-7
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Connecting an External SWT 3000 to Port 3 of the VFx Modules
Connecting an External SWT 3000 to Port 4 of the VFx Modules
10.2 Connection of an External SWT 3000 to the PowerLink 50/100
Copper Line Equipment Module
345