Siemens SWT 3000 Equipment Manual page 223

Example 7: Open PowerSys and connect with IP address "192.168.20.202", user level "Control" and RM address
"11"
C:\Program Files\PowerSys\P3.5.110\PowerSys_35110.exe /F 192.168.20.202
EXAMPLE 8: Open PowerSys and connect with IP address "192.168.20.203", user level "Expert", password "1234"
and SSL Encryption
C:\Program Files\PowerSys\P3.5.130\PowerSys_35110.exe /F 192.168.20.203
Connection Information
The PowerSys application status bar can show following information (see the following figure):
•
Which device is connected?
•
Which connection interface is currently used?
•
What is the status level of the user?
[scpowers-300414-01.tif, 1, en_US]
Figure 5-26
NOTE
i
i
For SWT 3000, the device name in position (2) can be set in the <Device Identity> field according to the
following steps: <SWT 3000 --->Information--->Update Information> (see
NOTE
i
i
For PowerLink, the device name in position (2) can be set in the <Device> field according to the following
steps: <PowerLink --->Information--->System--->Update Information> (see
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
PowerSys Status Bar
PowerSys and Auxiliary Software Tools
5.2 PowerSys Startup
Figure 5-24).
Figure 5-25).
223