Siemens SWT 3000 Equipment Manual page 259

•
In the third step, click the EN100 Interface Settings File (IFD file) button.
The following dialog appears:
[scselen1-200513-01.tif, 1, en_US]
Figure 5-64
Explanation for the default IFD files:
xxx_SnmpOFF_HttpOFF.ifd:
xxx_SnmpOn_HttpON.ifd:
Select the proper IFD file of the EN100 module.
After selection of the IFD file, click Open.
NOTE
i i
A default IFD file for the selection of input file is presented to the MergeTool user in the PowerSys installa-
tion folder \Px.y.zzz\Util\MergeTool.
After selecting the Input files, click the Load button. If multiple matching SWT 3000 devices are found in the
local station, they are listed in the Choose SWT Device area.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
IFD File Selection of the EN100 Module
EN100 SNMP and HTTP services are enabled
EN100 SNMP and HTTP services are disabled
PowerSys and Auxiliary Software Tools
5.8 MergeTool for IEC 61850
259