Diagnostics and Error Handling
4.6 Alarm Messages in the Service Program PowerSys
4.6
Alarm Messages in the Service Program PowerSys
[scalmess-281011-01.tif, 1, en_US]
Figure 4-13
If there is a fault, which makes it impossible to run the normal operation the system produces fault indica-
tions. These indications are displayed in the SWT 3000 > Information > Alarms / Errors submenu. The display
is refreshed with the Read button.
194
The Alarm Messages Submenu
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020