Siemens SWT 3000 Equipment Manual page 231

Click the Edit button in the Select Target Configuration dialog. The Edit Target Configuration dialog
appears.
[sctrgcon-020413-01.tif, 1, en_US]
Figure 5-33
Verify if the default CPU type XE167F-96F in the Type check box is set and click OK.
Select Siemens SWT 3000 - PU4 (v1.1 - serial, 115200 baud) and click OK.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Edit Target Configuration Dialog
PowerSys and Auxiliary Software Tools
5.4 MemTool Installation
231