Ip Network Configuration - Siemens SWT 3000 Equipment Manual

[scposcsy-130711-01.tif, 1, en_US]
Figure 3-49
(1) External synchronizing pulse
(2) Line sync. mode off
(3) Line sync. mode Master
(4) Line sync. mode Slave

IP Network Configuration

3.5.13
The Ethernet interface of the SWT 3000 and its setting options are configured by the SWT 3000 Web interface.
There are only a few Ethernet parameters configured in the PowerSys service program. The following tables
and figures describe the tabs of the PowerSys menu SWT 3000 > Configuration > Net Configuration and
those Ethernet parameters, which are directly configured in PowerSys.
For details of the Ethernet configuration via the Web interface, refer to chapter
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020
Possibilities for Clock Synchronization
Installation and Commissioning
3.5 Device Configuration
6.4.1 Overview and following.
157