Import Utility Files - Keysight PD1000A Startup Manual

IV and CV Device Characterization

Import Utility Files

This section uses the setup files that you downloaded to a memory stick to
perform a one-time installation of various utility files. (See "Download Setup and
Configuration Files" on page 19.)
1 Insert the memory stick into the front panel.
2 In the tabs on the left of the EasyEXPERT screen, select Application Test.
3 Click on the Category... drop-down menu.
4 Select the Utility checkbox.
5 Click on the Library drop-down menu.
6 Select Import... This opens a file selection dialog.
7 Browse to the location where you saved the PD1000A setup files.
8 Select the following PD1000A setup files:
9 Click Open. This imports the selected files and makes them available for tests,
40
– Gate Diode PD1000A.xtd
– Ic-Vge PD1000A.xtd
– Id-Vgs PD1000A.xtd
– Rg, Cgg for IGBT PD1000A.XTD
– Rg, Cgg for PowerMOSFET PD1000A.XTD
– Temperature Sensor 1.xtd
– Temperature Sensor 2.xtd
– UHC Selector Input Selection.xtd
thermal platform support, and ultra-high current (UHC) support.
Keysight PD1000A Power Device Measurement System Startup Guide
IV and CV Test Requirements