Installation Steps; Install Add-In Modules (Optional) - HP AdvanceStack 10Base-T Hub-12 Installation And Reference Manual

Power cord, one of the following:
Australia/New Zealand (8120-6175)
Denmark (8120-6178)
Europe (8120-6174)
Switzerland (8120-6179)
Japan (8120-6176)
United Kingdom (8120-6173)
United States/Canada (8120-6177)

Installation Steps

1. Install Add-in Modules (optional)

The HP AdvanceStack 10Base-T Hubs can be custom-configured by
installing an optional Ethernet SNMP Module and/or an HP Transceiver
Module. If you intend to install any of these optional modules, refer to
the documentation that was shipped with it.
It may be more convenient to install these optional modules before
installing the hub in a rack or other location. Inspect your installation
site and identify whether the hub's module slots will be accessible.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installing the HP AdvanceStack 10Base-T Hubs
1-3