Table of Contents
Advertisement
IQ DISPLAY MODULE (IQDM-P) SERIES 2
PROGRAMMING
Program
Monitor
Faults
Functions
Information
Programmer Setup
Figure 29-2 Access Program Menu
M1/M2 SPEED CAL
The M1/M2 speed cal (speed calibration) menu item allows the user to fine tune the vehicle speed. This feature cannot
be used to increase the vehicle speed. The range for speed calibration is 0 to 30. Each time the number is increased,
the top speed will be decreased by approximately 0.1 mph (0.2 km/h). The top vehicle speed will be determined by the
M1/M2 speed menu item and the speed calibration setting. For example, if the speed setting is set for a value of 3
(15.0 mph (24.1 km/h), and the speed calibration is set for 5, the total top speed of the vehicle should be approximately
14.5 mph (23.3 km/h). See the table below for a list of possible approximate speed calibrations.
TABLE CONTINUED ON NEXT PAGE
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
29
Program Menu
Page 29-3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
