ELECTRICAL COMPONENTS: ELECTRIC
VEHICLES
REVERSE BUZZER
See General Warning on page 1-1.
TESTING THE REVERSE BUZZER
See Test Procedure 27 – Reverse Buzzer on page 22-34.
REVERSE BUZZER REMOVAL
1.
Disconnect the batteries and discharge the controller. See Disconnecting the Batteries – Electric Vehicles,
Section 1, Page 1-4.
2.
Remove center dash. See Key Switch Removal on page 24-1.
3.
Disconnect the 18-gauge red and orange/white wires from reverse buzzer.
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
Figure 24-5 Motor Controller Output Regulator (MCOR) Mounting
24
Reverse Buzzer
2
1
Page 24-7