Front Brake Cable Installation - Club Car Turf 252 2007 Maintenance And Service Manual

WHEEL BRAKE ASSEMBLIES
3. Remove cotter pin (9), clevis pin (10), and E-clip (8) from brake cable at equalizer (18) (Figure 6-22, Page 6-16).
4. Remove bolt (4) and nut (6) from brake cable clamp (5) (Figure 6-21, Page 6-15).
5. Remove cable from vehicle.
1

FRONT BRAKE CABLE INSTALLATION

1. Place brake cable through frame mounting hole behind equalizer and install E-clip (8) on cable housing (Figure
6-22, Page 6-16).
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
Figure 6-21 Front Brake Cables
Front Brake Cables
4
6
5
8
7
6
Page 6-15