Forward/Reverse Shifter Cable Adjustment - Club Car Turf 252 2007 Maintenance And Service Manual

UNITIZED TRANSAXLE: DASH-MOUNTED
20
Forward/Reverse Shifter Cable SHIFTER

FORWARD/REVERSE SHIFTER CABLE ADJUSTMENT

With the shifter lever of the unitized transaxle in the NEUTRAL position (Figure 20-54, Page 20-22), the
Forward/Reverse handle (9) (Figure 20-53, Page 20-21) should align with the N position on the dash. For minor
adjustments, the nut (10) may be loosened and the ball joint socket (4) rotated to get the proper adjustment (Figure
20-53, Page 20-21). See following CAUTION.
CAUTION
• Be sure threads of cable are engaged in ball joint socket at least 1/4 inch (6.35 mm). If ball joint socket
comes loose from the cable, the Forward/Reverse shifter will not operate properly.
592
Figure 20-54 Forward/Reverse Shifter Positions
For major adjustments, the cable jacket retaining nuts (6) must be loosened and adjusted. When the cable is
properly adjusted, with the Forward/Reverse handle (9) (Figure 20-53, Page 20-21) in the NEUTRAL position, the
shifter arm of the transaxle will also be in the NEUTRAL position (Figure 20-54, Page 20-22). Tighten nuts at the
transaxle to 22 ft-lb (29.8 N·m).
Page 20-22 2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual