ELECTRICAL COMPONENTS: PEDAL-START GAS
VEHICLE
OIL LEVEL SENSOR REMOVAL
See Oil Level Sensor Removal on page 15-5.
OIL LEVEL SENSOR INSTALLATION
See Oil Level Sensor Installation on page 15-5.
HEADLIGHTS
See General Warning on page 1-1.
TESTING THE HEADLIGHT SOCKET
See Test Procedure 30 – Voltage at Headlight Socket on page 12-40.
HEADLIGHT BULB REMOVAL
1.
Disconnect battery. See Disconnecting the Battery – Gasoline Vehicles, Section 1, Page 1-3.
2.
From the front of vehicle, reach under cowl and turn the wire harness/halogen bulb assembly, (4 and 6), clockwise
one-quarter turn (Figure 14-31, Page 14-29).
3.
Remove the wire harness/halogen bulb assembly (4 and 6) from the headlight lens (7).
4.
Lift the retaining tabs on the connector (4) and remove halogen bulb assembly (6).
513
Figure 14-31 Headlight Assembly
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
14
Headlights
Page 14-29