Table of Contents
Advertisement
24
Key Switch
3.
Slide center dash panel up steering column by snapping top out and then rotating the panel out and up.
4.
Disconnect the wires from the key switch. Do not allow wires to touch.
5.
From the back of the dash panel, push down on the retaining tabs surrounding the key switch (4) and remove the
key switch cap (8). Hold the key switch and remove the switch retaining nut (6) from the outside of the dash
panel (Figure 24-2, Page 24-2).
9
6
Figure 24-2 Key Switch
KEY SWITCH INSTALLATION
1.
Position the key switch and flat washer (9) in the center dash, then install and tighten the switch retaining nut (6)
to 40 in-lb (4.5 N·m). Install key switch cap (8) in center dash (Figure 24-2, Page 24-2).
Page 24-2
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
Figure 24-1 Dash Removal
8
ELECTRICAL COMPONENTS: ELEC-
3
TRIC VEHICLES
2
1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
