Program (Iqdm-P Only) - Club Car Turf 252 2007 Maintenance And Service Manual

IQ DISPLAY MODULE (IQDM) SERIES 2 AND
IQDM-P DIAGNOSTICS
2
1. Display Screen 2. Navigation Button 3. Change Value Button 4.
Bookmark Buttons
Figure 23-2 Handset Controls
The following menus are accessible on the IQDM Series 2 handset:

PROGRAM (IQDM-P ONLY)

The program menu allows the user to view and change custom speed controller settings. See Program Menu,
Section 29, Page 29-2.
Monitor
The monitor menu displays values for certain parameters to facilitate speed controller troubleshooting. See Monitor
Menu on page 23-4.
Faults
The faults menu displays all faults recorded by the speed controller since the history was last cleared. Each fault is
listed only once in the fault history menu, even if the fault has occurred multiple times. See Faults Menu on page 23-9.
The number of fault occurrences can be viewed in the fault counter located in the lower section of the monitor menu.
Functions
The functions menu allows the user to transfer all current settings from the speed controller to the handset and from
the handset to the speed controller. See Functions Menu on page 23-14.
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
1
3
4
23
Menu Navigation
Page 23-3