Section 3 - General Information; Serial Number Identification - Club Car Turf 252 2007 Maintenance And Service Manual

SECTION 3 – GENERAL INFORMATION
DANGER
• See General Warning on page 1-1.
WARNING
• See General Warning on page 1-1.
Important features unique to the different models covered in this manual are highlighted. Club Car, Inc. recommends
the owner/operator read and understand this manual and pay special attention to features specific to their vehicle(s).
Each vehicle is equipped with either a two-position key switch or a three-position key switch. Vehicles equipped with a
two-position key switch are referred to as "pedal-start" and vehicles equipped with a three-position key switch are
referred to as "key-start."
Refer to the owner's manual provided with the vehicle for information on the following topics:
• Controls and Indicators
• Pre-Operation and Daily Safety Checklist
• Driving Instructions
• Bed Latch
• Prop Rod
• Loading and Unloading
• Towing with a Vehicle
• Transporting on a Trailer
• Subsequent Owner Registration
• Warranties

SERIAL NUMBER IDENTIFICATION

The serial number of the vehicle is printed on a bar code decal mounted on the frame directly above the accelerator
pedal (Example: EG0601-123456) (Figure 3-1, Page 3-2). There is a second serial number decal mounted on the
front body frame behind the center dash panel. The center dash panel must be removed to view this number (Figure
3-2, Page 3-2). See following NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
3
Page 3-1