Table of Contents
Advertisement
BODY AND TRIM
2.
Align holes in tailskirt (4) with holes in vehicle frame. Position tailskirt flush against frame.
3.
Install two thread-forming screws (5) and flat washers (13) in tailskirt and tighten to 80 in-lb (9.0 N·m).
FLOOR MAT
See General Warning on page 1-1.
FRONT FLOOR MAT REMOVAL
1.
Remove the brake and accelerator pedals. See Accelerator and Brake Pedal Group on page 5-1.
2.
Remove horn switch if so equipped.
3.
Remove the top edge of the floor mat from the overlapping flange under the dash.
4.
Lift the mat from the vehicle.
FRONT FLOOR MAT INSTALLATION
1.
Install the floor mat in the reverse order of removal.
2.
Install the brake and accelerator pedals. See Accelerator and Brake Pedal Group on page 5-1.
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
4
Floor Mat
Page 4-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
