Charger Receptacle; Charger Receptacle Inspection - Club Car Turf 252 2007 Maintenance And Service Manual

ELECTRICAL COMPONENTS: ELECTRIC
VEHICLES
– Make sure that the vehicle operates in the reverse direction when the Forward/Reverse switch is in the
REVERSE position. The reverse buzzer will sound as a warning when the Forward/Reverse switch is in
REVERSE.
– Make sure that the vehicle does not operate when the Forward/Reverse switch is in the NEUTRAL position.
1. 10 Ga. Blue
2. 4 Ga. Yellow and 4 Ga. Green
3. Bolts
4. 10 GA. Orange
5. One 4 Ga. Black and Two 10 Ga. Black
6. 10 GA. White

CHARGER RECEPTACLE

See General Warning on page 1-1.
The charger cord, plug, and receptacle are wear items and should be inspected daily. Visually inspect them for cracks,
loose connections, and frayed wiring; they must be replaced when worn or damaged. If charger plug or receptacle
show signs of corrosion or the plug is difficult to insert or remove, the receptacle contacts and plug terminals should be
cleaned with a good electrical contact cleaner or lightly sprayed with WD-40® brand spray lubricant. The plug should
then be inserted and removed several times to ensure ease of insertion, ease of removal, and good electrical contact.
Testing the Charger Receptacle
See Test Procedure 23 – Voltage at Charger Receptacle Red Wire Socket on page 22-30.
See also the appropriate battery charger maintenance and service manual.

CHARGER RECEPTACLE INSPECTION

Inspect the receptacle for cracks, loose connections and frayed wiring. See following NOTE.
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
1
2
6
4
5
3
Figure 24-10 Speed Controller Wiring
24
Charger Receptacle
Page 24-13