Table of Contents
Advertisement
7
Steering Column
5
4
1
9
1500-18300-10252
Figure 7-1 Steering Wheel Removal
STEERING WHEEL INSTALLATION
NOTE: To minimize corrosion and to make future removal of the steering wheel easier, apply a small amount of oil or
anti-seize compound to steering shaft splines and taper before installing the steering wheel.
1.
Install the steering wheel (3) on the splines of the steering shaft (4). Be sure to align the match marks placed on
the wheel and steering column shaft in step 2 above (Figure 7-1, Page 7-2).
2.
Install the steering wheel nut (5) and tighten to 156 in-lb (17.6 N·m).
3.
Install the plate (2) and screws (1) (Figure 7-1, Page 7-2). Tighten screws to 16 in-lb (1.8 N·m).
4.
Connect the battery cables. See Connecting the Battery – Gasoline Vehicles, Section 1, Page 1-3. See
Connecting the Batteries – Electric Vehicles, Section 1, Page 1-4.
STEERING COLUMN
See General Warning on page 1-1.
STEERING COLUMN REMOVAL
1.
Remove the steering wheel as previously instructed.
2.
Remove the front body. See Front Body Removal on page 4-3.
Page 7-2
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
STEERING AND FRONT SUSPENSION
1500-18300-10253
Figure 7-2 Steering Wheel Puller
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
