Table of Contents
Advertisement
20
Unitized Transaxle Installation
1
583
Figure 20-33 Governor Cable Bracket
22. Remove the six bolts mounting the unitized transaxle to the engine.
22.1.Remove four transaxle mounting bolts (one at each corner of the transaxle mounting plate) (Figure 20-35,
Page 20-14).
22.2.Remove two middle transaxle mounting nuts from the engine block studs.
23. Remove leaf springs, stabilizer bar, wheels and brake assemblies from the transaxle.
585
Figure 20-35 Transaxle Mounting
UNITIZED TRANSAXLE INSTALLATION
See General Warning on page 1-1.
1.
Install the wheels. See Wheel Installation on page 8-1.
2.
Install the leaf springs. See Multi-Leaf Spring Installation on page 9-3.
3.
Install the stabilizer bar and jounce bumpers (if used) on the transaxle. insert xref here
Page 20-14
2007-2009 Turf 252, Carryall 252 and XRT 900 Maintenance and Service Manual
UNITIZED TRANSAXLE: DASH-MOUNTED
1
584
Figure 20-34 Accelerator Cable Bracket
SHIFTER
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
