Section 12 - Iq Display Module (Iqdm) Series 2 And Iqdm-P Diagnostics; Plugging The Handset Into The Vehicle - Club Car IQ Plus 2008 Maintenance And Service Manual Supplement

SECTION 12 – IQ DISPLAY MODULE (IQDM)
SERIES 2 AND IQDM-P DIAGNOSTICS
ý
DANGER
• See General Warning, Section 10, Page 10-1.
ý
WARNING
• See General Warning, Section 10, Page 10-1.
NOTE: For information secific to the IQDM-P handset programming features, see Section 18 – IQ DIS-
PLAY MODULE (IQDM-P) Programming.

PLUGGING THE HANDSET INTO THE VEHICLE

1. Connect one end of the cable to the jack located on the bottom of the handset.
2. Connect the cable adaptor to the IQDM cable.
3. Find the IQDM jack located on the vehicle.
4. Remove the dust cap from the IQDM jack.
5. Align the keyed portion of the plug with the IQDM jack and connect the plug to the jack.
Figure 12-1 IQDM Jack Under Instrument Panel
2008-2011 IQ Plus Electric Vehicle Maintenance and Service Supplement
12
Page 12-1