Calibration Download Failure Error Message - Agilent Technologies 8935 Series Manual

Error Messages

Calibration Download Failure Error Message

Calibration Download Failure Error Message
The following message occurs at powerup when the downloading of
calibration data is unsuccessful.
Cal file checksum incorrect. File reset to default values.
It indicates that the calibration data is corrupt, and although the Test
Set will function, measurements will be inaccurate. Calibration data is
downloaded from a memory card when certain assemblies are replaced,
or it is generated when the Periodic Calibration program is run. This
message will not occur again at powerup unless another unsuccessful
downloading occurs.
326 Appendix A