Commands By Subsystem - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

Agilent InfiniiVision 5000 Series Oscilloscopes
Programmer's Guide
5

Commands by Subsystem

Subsystem
"Common (*) Commands" on page 91
"Root (:) Commands" on page 116
":ACQuire Commands" on page 153
":CALibrate Commands" on page 167
":CHANnel<n> Commands"
":DISPlay Commands" on page 194
":EXTernal Trigger Commands"
":FUNCtion Commands" on page 214
":HARDcopy Commands" on page 231
":MARKer Commands" on page 241
":MEASure Commands" on page 252
":RECall Commands" on page 297
":SAVE Commands" on page 302
Description
Commands defined by IEEE 488.2 standard that
are common to all instruments.
Control many of the basic functions of the
oscilloscope and reside at the root level of the
command tree.
Set the parameters for acquiring and storing
data.
Utility commands for determining the state of
the calibration factor protection switch.
on page 175 Control all oscilloscope functions associated
with individual analog channels or groups of
channels.
Control how waveforms, graticule, and text are
displayed and written on the screen.
on page 204 Control the input characteristics of the external
trigger input.
Control functions in the measurement/storage
module.
Set and query the selection of hardcopy device
and formatting options.
Set and query the settings of X-axis markers
(X1 and X2 cursors) and the Y-axis markers (Y1
and Y2 cursors).
Select automatic measurements to be made
and control time markers.
Recall previously saved oscilloscope setups
and traces.
Save oscilloscope setups and traces, screen
images, and data.
A
89