Cab Display Module (Cdm) Error Codes - MacDon M105 Operator's Manual

9 Cab Display Module (CDM) Error Codes

NOTE:
In the case of dual codes being shown for an item (primarily the solenoid valves), the first code indicates a
SHORT CIRCUIT condition, while the second code indicates an OPEN CIRCUIT condition. IE. E41 would be a
SHORT in the Reel Aft solenoids (P55, P59), while E141 would indicate an OPEN circuit.
Codes
E1
E2 RTCH NOT ALLOWED
E3
E4
E5
E6 TEMP GAUGE SHORT
E7 SPEED STICK SHORT
HEADER ENABLE SHORT
E8
E9
E10 CDM INTERNAL ERROR
E11 CDM POWER UP
E12
E13 FUEL SOLENOID
E24 E124 DECK SHFT RIGHT P95
E25 E125 DECK SHFT LEFT P96
E26
E27
E28 E128 TILT P2A
E29 E129 TILT P4C
E30 E130 4 WAY VALVE P5A
E31 E131 BYPASS VALVE P1
E32 E132 HEADER UP/DOWN P4A
E33 E133 SCREEN CLEANERS
E34 E134 RIGHT STOP LAMP
E35 E135 LEFT STOP LAMP
E36 E136 RIGHT TURN LAMP
E37 E137 LEFT TURN LAMP
E38
E39
E40 E140 HIGH RANGE P5B
169890
CDM Display
Error Codes E14 to E23 not allocated
Return To Cut activated with the header off.
Wiring / connection problem.
Wiring / connection problem.
Wiring / connection problem.
Internal hardware or software problem.
CDM Module did not power up correctly.
WCM Fuel solenoid output fault detected.
Right Deck Shift solenoid P95 fault detected
Left Deck Shift solenoid P96 fault detected
Header Tilt solenoid P2A (V2A) fault detected
Header Tilt solenoid P4C (V4C) fault detected
4 Way valve solenoid P5A (V5A) fault detected
Bypass valve solenoid P1 (V1) fault detected
Header up / down solenoid P4A (V4A) fault detected
Screen cleaner output fault detected
Right stop lamp output fault detected
Left stop lamp output fault detected
Right turn lamp output fault detected
Left turn lamp output fault detected
High range solenoid P60 fault detected
359
Description
Revision A