OPERATOR'S STATION
3.18 Cab Display Module (CDM)
3.18.1 Engine and Windrower Functions
Figure 3.42: CDM Engine and Windrower Functions
A – Engine rpm.
B – Ground Speed: mph or kph.
C – DISPLAY: Engine/windrower functions.
D – HAZARD WARNING LIGHTS switch: Activates hazard warning lights, cancels turn signal.
E – SELECT switch: Allows operator to select display item on lower line. Push to SELECT.
F – TURN SIGNAL switches: Activates turn signals on windrower and header Push-ON / Push-OFF.
G – IGNITION switch positions: Accessory / Stop / Run / Start.
H – Engine warning lights: Engine Pre-Heat / Water In Fuel / CAUTION / Stop Engine.
60
169890
Revision A