Amber Lights - MacDon M105 Operator's Manual

4. Pinch the wire retainer (A), and lift away from hooks.
5. Remove bulb (B) from body, and pull wire from
connector (C).
IMPORTANT:
Do NOT touch the glass of the halogen bulb as the oils
or other chemicals from your skin will cause the bulb to
fail prematurely.
6. Match slots on new bulb (B) with lugs (D) in optical unit,
and insert bulb into unit.
7. Secure bulb with wire retainer (A).
8. Push wire into connector (C).
IMPORTANT:
For proper lighting pattern, be sure lights are installed
right side up.
9. Position light into light receptacle, ensuring top is up,
and secure with bezel (B) and screws (A).

Amber Lights

DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169890
MAINTENANCE AND SERVICING
276
Figure 5.151: Lamp Assembly
Figure 5.152: Swath Lights
Revision A