Display Selector Switch; Reel Position Switches - MacDon M105 Operator's Manual

Display Selector Switch

The display selector switch (A) selects and displays the
settings in the cab display module (CDM) top line read-out
(A) for each of the header controls.
Press switch (B) to scroll through settings.

Reel Position Switches

NOTE:
Reel position switches work on draper headers only.
To move reel, press and hold the switch at the location
shown. Release switch at desired position.
169890
OPERATOR'S STATION
Figure 3.38: GSL
Figure 3.39: Ground Speed Lever
A - Reel Down
C - Reel Up
58
B - Reel Forward
D - Reel Aft
Revision A