MacDon M105 Operator's Manual page 255

1. Screw the new secondary filter (A) onto the filter mount
until the gasket contacts the filter head.
2. Tighten the filter an additional 1/2 to 3/4 turn by hand.
IMPORTANT:
Do NOT use a filter wrench to install the filter.
Overtightening can damage the gasket and filter.
3. Open fuel valve (A) under fuel tank.
4. Prime the fuel system, refer to
page 244.
Draining Fuel Tank
Draining the fuel tank is necessary to remove old or contaminated fuel.
WARNING
• To avoid personal injury or death from explosion or fire, do NOT smoke or allow flame or sparks near
fuel tank when refueling.
• NEVER refuel the windrower when the engine is hot or running.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop the engine and remove the key.
2. Open the hood, refer to
Position), page 202.
169890
MAINTENANCE AND SERVICING
Priming Fuel System,
5.4.1 Opening Hood (Lower
Figure 5.85: Fuel System
Figure 5.86: Bottom of Fuel Tank
241
Revision A