MacDon M105 Operator's Manual page 297

2. Remove wing nut (A) and remove fuse box cover (B).
3. Refer to the decal on inside of cover for identification
of fuses and circuit breakers.
4. A cover may be installed over the circuit breaker.
Remove it to access the breaker.
Checking and Replacing Fuses
1. To check fuse, pull fuse (A) out of receptacle and
visually examine.
2. To replace fuse, insert new fuse into receptacle.
IMPORTANT:
Replacement fuses should match rating on decal shown
on following page.
Replacing Circuit Breakers and Relays
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Replace breakers and relays as follows:
1. Stop engine and remove key.
169890
MAINTENANCE AND SERVICING
283
Figure 5.166: Fuse Box
Figure 5.167: Fuses
Revision A