MacDon M105 Operator's Manual page 280

Removing Battery
CAUTION
Do not attempt to service battery unless you have the proper equipment and experience to perform the
job. Have it done by a qualified Dealer.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Open the hood, refer to
Position), page 203.
2. Open the platform, refer to
(Standard Position), page
3. Remove the red plastic cover from positive cable
clamps (A, C). Loosen the clamps and remove cable
from batteries.
4. Loosen clamps (B, D) on negative terminals and
remove cable from batteries.
5. Remove the bolt (A) that secures the battery angle (B)
to the battery strap. Remove the battery angle (B).
169890
MAINTENANCE AND SERVICING
5.4.3 Opening Hood (Highest
5.5.1 Opening Platform
205.
Figure 5.129: Electrical System
Figure 5.130: Electrical System
266
Revision A