MacDon M105 Operator's Manual page 158

9. Disconnect header drive hydraulics (A) and electrical
harness (B) from header and store in support on
windrower left cab-forward side. Refer to the draper
header operator's manual for further information.
10. Disconnect reel hydraulics (A) from header and
store on bracket at windrower left cab-forward side.
Refer to the draper header operator's manual for
further information.
CAUTION
Check to be sure all bystanders have cleared the area.
11. Start engine and activate HEADER TILT cylinder
switch on ground speed lever (GSL) to release load
on center-link cylinder.
169890
OPERATION
Figure 4.109: Header Drive Hydraulics
Figure 4.110: Reel Hydraulics
Figure 4.111: GSL
A - Header Tilt Up
144
B - Header Tilt Down
Revision A