MacDon M105 Operator's Manual page 127

5. Move tow-bar off drawbar.
6. At rear of windrower, remove pins (A), lift drawbar
support (B) to horizontal position, and reinstall pins (a)
as shown.
7. Alternative drawbar (C) is used for attaching a tow-bar
behind swath roller.
IMPORTANT:
Do NOT use alternative drawbar for any other purpose.
8. Disassemble tow-bar, and store on header. Refer to
header operator's manual.
IMPORTANT:
To prevent damage to the lift system when lowering
header lift linkages without a header or weight box
attached to windrower, ensure that float engagement pin
is installed in storage location (B) and NOT installed at
hole location (A).
169890
OPERATION
Figure 4.52: Drawbar Hitch
Figure 4.53: Lift Arms
113
Revision A