MacDon M105 Operator's Manual page 44

SYSTEM CAPACITIES
Fuel Tank
Cooling
Hydraulic Reservoir
HEADER DRIVE 1
Type
Displacement (manually adjusted
for header type and/or size)
Flow
Pressure
Function
HEADER LIFT/TILT Pump (C)
Type
Displacement
Flow
Gear Pump
System Pressure
(Relief/Max)
Function
HEADER FLOTATION
Primary
Adjustment
Inner Booster
Springs
CAB
Mounting Type
Width
Depth
Dimensions
Height
Volume
Driver
Seat
Training
Windshield Wiper
Heater
169890
DESCRIPTION
97 US Gallons (367 L)
6.6 US Gallons (25 L)
11.5 US Gallons (44 L)
Single Piston Pump
(D) 1
Hydraulic,
Load Sensing Control
0–3 cu. in. (49 cc)
0–30 gpm
(0–114 L/min)
4000 psi (27,579 kPa)
Knife andBrake Charge
1
Hydraulic Double Acting Cylinders. Tilt - Optional Hydraulic Positioning,
Optional Hydraulic Center-link
1.02 cu. in. (16.7 cc)
0–11.5 gpm (44 L/min)
2500 psi (17,237 kPa)
Lift / Tilt / Float
Manual, External, Drawbolt With Springs (1 per side).
Two
Rubber Isolation
63 in. (1600 mm)
68-1/3 in. (1735 mm) (at top of window)
64.6 in. (1640 mm)
125 cu. ft. (3540 L)
Adjustable Air-Ride Suspension, Seat Belt
Folding, Cab Mounted, Seat Belt
31-1/2 in. (800 mm) Blade
24,000 Btu/h (7038 W)
30
Gear Pump
(B) 1
Gear
1.02 cu. in. (16.7 cc)
0–11.5 gpm
(0–44 L/min)
2500 psi (17,237 kPa)
Reel Drive and
Supercharge for
Traction Drive
Gear Pump
(A) 1
Gear
1.02 cu. in. (16.7 cc)
0–11.5 gpm
(0–44 L/min)
2500 psi (17,237 kPa)
Conveyor (Draper,
Reel/Auger- header
dependent)
Revision A