MacDon M105 Operator's Manual page 234

1. Unscrew the two knobs (A) attaching cover and filter to
cab wall, and remove the cover and filter assembly (B).
2. Separate the filter (B) from the cover (A).
3. Clean or replace filter.
Cleaning Return Air Cleaner, page
4. Assemble the cleaner (B) and cover (A), and position
on cab wall over opening.
5. Secure filter assembly (B) to cab wall with knobs (A).
Cleaning Return Air Cleaner
Clean the electrostatic filter as follows:
169890
MAINTENANCE AND SERVICING
If cleaning filter, refer to
220.
Figure 5.47: Return Air Filter
Figure 5.48: Return Air Filter
Figure 5.49: Return Air Filter
220
Revision A