MacDon M105 Operator's Manual page 148

Self-propelled windrower

Hide thumbs Also See for M105:

Table of Contents

11. Engage safety props on both lift cylinders as follows:

a. Stop engine and remove key from ignition.

b. Pull lever (A) and rotate toward header to release

and lower the cylinder stop (B) onto cylinder.

c. Repeat for the opposite lift cylinder.

12. Install the pin (B) through header leg, (engaging

U-bracket in lift linkage) on both sides and secure with

hairpin (A).

13. Raise header stand (D) to storage position by pulling

spring pin (C) and lifting stand into uppermost position.

Release spring pin (C).

Figure 4.85: Cylinder Stop

Figure 4.86: Header Leg

Troubleshooting