MacDon M105 Operator's Manual page 264

3. Remove cap (B) and add coolant until one-half full.
NOTE:
For coolant specifications, refer to
and System Capacities, page
4. Replace cap (B).
5. Close the platform. Refer to
(Standard Position), page
6. Close the hood. Refer to
Position), page 204.
Maintaining Engine Cooling Box
Refer to the following procedures:
•
Opening Cooler Box Screen, page 250
•
Cleaning Screens and Coolers, page 251
•
Cleaning Cooler Box Components, page 252
•
Adjusting Screen Cleaner Duct to Screen Clearance, page 254
•
Closing Cooler Box Screen, page 255
Opening Cooler Box Screen
1. Open the hood. Refer to
Position), page 203.
2. Push latch (A) and open screen assembly access
door (B). Secure with rod stored inside screen door.
169890
MAINTENANCE AND SERVICING
Lubricants, Fluids,
199.
5.5.2 Closing Platform
206.
5.4.4 Closing Hood (Highest
5.4.3 Opening Hood (Highest
Figure 5.101: Engine Cooling System
Figure 5.102: Engine Cooling System
250
Revision A