Display Warnings And Alarms - MacDon M105 Operator's Manual

Display Warnings and Alarms

Informs Operator of abnormal windrower conditions.
Figure 3.46: CDM Display Warnings and Alarms
Display (A)
CENTER STEERING
DISENGAGE HEADER
ENGINE OIL PRESSURE
ENGINE TEMPERATURE
HEADER DISENGAGED
IN PARK
KNIFE SPEED
OVERLOAD
169890
OPERATOR'S STATION
Flashing Alarm Tone
Beeps at 2 per second until
corrected
X None
Continuous loud tone until oil
X
pressure is regained
Ongoing intermittent moderate
X
tone until temperature is below
215°F (102°C)
None
X One short beep
Ongoing intermittent moderate
X
tone until condition is corrected
Description
Interlock switch not closed with
key ON / engine OFF: GSL not in
N-DETENT or steering wheel not
centered
Header switch is ON when ignition
switch turned ON
Low engine oil pressure
accompanied by warning lights
Engine temperature over 230°F
(110°C) accompanied by warning
lights
Normal
GSL in N-DETENT, steering
wheel centered, and brakes are
engaged
Machine overload: knife speed
drops below programmed value
68
Revision A