Attaching An A-Series Header: Mechanical Center-Link - MacDon M105 Operator's Manual

Self-propelled windrower

Hide thumbs Also See for M105:

Table of Contents

Check to be sure all bystanders have cleared the area.

18. Start engine and activate HEADER DOWN switch (A)

on GSL to lower header fully.

19. Connect header drive hoses (A) and electrical

harness (B) to header. Refer to the auger header

operator's manual.

Attaching an A-Series Header: Mechanical Center-Link

To attach an A-Series header to a windrower equipped with a mechanical center-link, follow these steps:

Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a

pet could engage an idling machine.

Stop engine and

Figure 4.136: GSL

Figure 4.137: Header Drive Hoses and Harness