Operating With A D-Series Header; Configuring Hydraulics - MacDon M105 Operator's Manual

Self-propelled windrower

Hide thumbs Also See for M105:

Table of Contents

4.6 Operating with a D-Series Header

4.6.1 Conﬁguring Hydraulics

The windrower must be ﬁtted with a draper drive basic kit to operate D-Series draper headers.

Windrowers equipped with D-Series hydraulics have four

header drive hoses on the LH side.

There are also up to ﬁve reel drive hoses on the RH side.

If necessary, obtain the following kit from your MacDon

• Base Kit MD #B5577 (Installation instruction MD

#169537 is supplied with the kit.)

Figure 4.170: Draper Header Drive Hydraulics

Figure 4.171: Draper Header Reel Hydraulics