Checking Engine Speed; Checking Gauges And Cab Display Module (Cdm) Display - MacDon M Series Unloading And Assembly Instructions

5.11.4 Checking Engine Speed

1. Move throttle to idle position.
2. Check engine speed on cab display module (CDM) (A)
and compare to value in table.
3. Move throttle to maximum rpm position.
4. Check engine speed on CDM (A) and compare to value
in table.
Table 5.3 Engine Speed
Model Idle
M105
M155 1100
M205

5.11.5 Checking Gauges and Cab Display Module (CDM) Display

1. M205 and M155 only: Ensure the engine temperature
gauge (A) and fuel gauge (B) are working.
147962
PERFORMING PREDELIVERY CHECKS
Maximum rpm (No Load)
2270–2330
2320–2350
2250–2340
Figure 5.27: M105 Cab Display Module (CDM)
Figure 5.28: M155/M205 Cab Display
Module (CDM)
Figure 5.29: M155/M205 Temperature and
Fuel Gauges
338
Revision A