MacDon M105 Operator's Manual page 171

Self-propelled windrower

Hide thumbs Also See for M105:

Table of Contents

9. Engage safety props on both lift cylinders as follows:

a. Stop engine and remove key from ignition.

b. Pull lever (A) and rotate toward header to release

and lower the safety prop (B) onto cylinder.

c. Repeat for the opposite lift cylinder.

10. Install clevis pin (A) through each boot and foot, and

secure with hairpin. Do this to both sides.

Ensure clevis pin (A) is fully inserted and hairpin is

installed behind bracket.

Figure 4.144: Cylinder Stop

Figure 4.145: Header Boot

Troubleshooting