Transport Drawbar; Warning Beacons; Weight Box; Windshield Shades - MacDon M105 Operator's Manual

OPTIONS AND ATTACHMENTS

7.1.18 Transport Drawbar

The transport drawbar mounts to the walking beam and allows the M105 to tow MacDon headers equipped with a
slow-speed transport system. This drawbar is to be used for hitching tow-behind swath rollers only. Requires a

weight box.

MD #B5411
39
Instruction MD #169420 is included with the bundle

7.1.19 Warning Beacons

Two rotating warning beacons that are designed for installation onto the pre-wired cab. The kit includes the
beacons, a switch, mounting hardware, and instructions. The beacons are standard equipment for exported
windrowers, and are optional for North America. Fits 2009 and newer machines.
MD #B5582
Instruction MD #169538 is included with the bundle.
7.1.20 Weight Box
To move the windrower without an attached header, attach the weight box to the header lift system. The weight
box allows transporting a header behind the windrower by providing additional weight on the drive wheels.
MD #B5238 – Weight box without harness
40
MD #B5240 – Weight box without harness and concrete.
40
Instruction MD #169280 is included with the bundle.
MD #B5280 – Wiring harness for weight box. Includes hitch pin and wiring for use with slow speed transport. Use
with MD #B5238 and MD #B5240. Required when towing header with SP windrower.
Instruction MD #169278 is included with the bundle.

7.1.21 Windshield Shades

Retractable sun shades for front and rear windows. Attachment hardware is included.
MD #B4866
Instruction MD #169218 is included with the bundle.
39. Weight box is required, refer to 7.1.20 Weight Box, page 340
40. Wiring harness MD #B5280 is also required to tow a header. Refer to 7.1.16 Towing Harness, page 339
340
169890 Revision A