Cab Display Module (Cdm) Programming - MacDon M105 Operator's Manual

3.18.5 Cab Display Module (CDM) Programming

Figure 3.47: CDM
A - Side Display
D - Menu Item Scroll Forward
SIDE DISPLAY: displays software revision status.
• Upper Line – C### (CDM)
• Lower Line – M### (WCM)
MAIN DISPLAY displays menu item and selection.
• Upper Line – Menu Item
• Lower Line – Selection
SELECT SWITCH places monitor into Program Mode with PROGRAM switch. Press to accept menu item and
advance to next item.
MENU ITEM SCROLL FORWARD displays value under menu item.
• Push to scroll forward
• Hold down for fast scroll
MENU ITEM SCROLL BACKWARD displays value under menu item.
• Push to scroll backward
• Hold down for fast scroll
PROGRAM SWITCH places monitor into program mode. Press while pressing SELECT switch.
10. Fast scroll applies only when changing KNIFE SPEED, OVERLOAD PRESSURE, and TIRE SIZE.
169890
OPERATOR'S STATION
B - Main Display
E - Menu Item Scroll Backward
10
10
C - Select Switch
F - Program Switch
70
Revision A