Attaching A D-Series Header: Mechanical Center-Link - MacDon M105 Operator's Manual

19. Connect header drive hoses (A) and electrical
harness (B) to header. Refer to the draper header
operator's manual.
20. Connect reel hydraulics (A) at right-hand side
of windrower.
operator's manual.

Attaching a D-Series Header: Mechanical Center-Link

NOTE:
This topic assumes that draper header boots have already been attached to the windrower lift linkage. If that is
not the case, refer to
4.6.2 Attaching Header Boots, page
To attach a D-Series header to a windrower equipped with a mechanical center-link, follow these steps:
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169890
Refer to the draper header
OPERATION
Figure 4.90: Header Drive Hoses and Harness
Figure 4.91: Reel Hydraulics
168.
136
Revision A